So, while experimenting with these little quilts I have learned a few things:
1. I don't like double sided fusible-like the effect but the process is painful.
2. They don't need to be perfect-just pleasing
3. I love doing them-instantaneous joy at the completion
4. They use up nicely those bits of fabrics left over from paper piecing that are too small for regular quilts.
5. They are addicting!
Step 1 Gather Materials
Peltex: I used Peltex double sided fusible heavy duty. There are several products out there that will do the trick. The Peltex made a nice firm card that ironed flat and wasn't too thick.
Double sided lightweight interfacing: if you feel the need
Glue sticks: The one I used was acid free and went on blue but turned clear
Material: Thematic prints, batiks (worked well with the raw edge applique technique because they didn't fray as much as the regular). Also a plain cotton for the back-light color.
Scrapbooking stuff: You know you have it:) Most of my quilting friends scrapbook as well or at least used to. Stamps/inks (Check the dollar bins at Michaels) also, I found the large "Postcard Stamp" at Road to CA for 14.00. I am sure it could be bought on line-but it isn't necessary-you can draw it on. Cardstock, charms, yarn/ribbon, stickers, beads, buttons, words, pens, colored pencils, etc.
Iron and Ironing pad, Sewing machine, embroidery thread, an ironing sheet for applique is nice but not essential, Rotary cutter and mat.
 |
| Gather supplies into one area so they are easily accessible |
Step 2 Cut Base of postcard
Cut Peltex with rotary cutter and mat into 4x6 inch rectangles. My roll was 24 inches wide so I cut it into 6 inch strips and then cut each strip every 4 inches so I got 6 postcard blanks every 6 " or 18 postcards for 1/2 yard of Peltex.
 |
| Cut Base material with rotary cutter and ruler into 6" strips then cut every 4 " | | | | | | | | | | |
|
|
|
Step 3 Stamp your backside (not your backside-the card backside)
I stamped quite a few of these ahead of time so I didn't have to stop and make a back. Cut your light colored plain cotton 4.5x6.5 so it overlaps a bit. Then either stamp with your postcard stamp or lay it aside to write on after the card is complete.
 |
| Cut material 4 1/2 x 6 1/2 |
 |
| blot don't rub ink onto large stamp |
 |
Center stamp onto material
|
 |
| Postcard backing complete-set aside |
Step 4 Choose your fabric base and pieces for postcard
The St. Patrick's day post card was a solid base with pieces cut out of another thematic fabric after it had been ironed onto double sided lightweight fusible. The 2nd side of the fusible was then scored with the tip of a scissors or pin and backing is peeled off and then piece is stuck to base piece and ironed down.
 |
| Pieces are selected |
 |
| second side of double sided fusible is scored |
 |
| plastic from fusible is peeled off |
 |
| Pieces are ironed down individually and colored pencil is being applied |
Another way to add fabrics to the front is with glue. All the tutorials I read said to use fusible interfacing but I am going to do it my way because it is just faster and less tedious-either way will work. I used an acid free glue stick and just went over the back of each piece-careful to glue the background before the foreground. Since I am going to stitch everything down-I don't see why it would matter. Let me know if you have a reason that it matters that I don't see.
 |
| Pieces selected from paper piecing scraps |
 |
| Same pieces glued down starting from back and moving forward |
|
|
|
I decided I liked the looks of the purple mountains fabric backside up. It gives that smoky look at dusk that I wanted. Our Santa Maria Valley has 5 mountain peaks when viewed from the north end looking toward the southwest and the mountains are very rocky-hence the blue squares on the purple mountains. The sun sets behind them and we have beautiful red sunsets. Anyway-the block is securely attached and now I will take it to the machine using decorative thread.
Step 5 Machine Quilt
 |
| all stitched down |
 |
| from the back |
Step 6 Trimming
Trimming can be done two ways, by hand or with a rotary cutter. There are pros and cons to both. Rotary cutting gives a nice clean edge but if not careful you can nic the postcard. Hand cutting gives you more control but is not quite as clean as the rotary.
 |
| Iron backing on, let cool, line up card and cut with a rotary cutter |
 |
| Trim front even with card with sharp scissors |
 |
| iron back to trimmed front |
 |
| back peeks out about 1/4 inch all around |
 |
| hand trim flush to edge or rotary cut with ruler and blade |
Step 7 Finish Edge
Set your
machine to zigzag. I like a thin edge that is tightly sewn-personal
choice. I set my machine to 3.0 mm width and 0.3 length and go around
the card 2 times.
 |
| machine set to 3.0 x 0.3 |
 |
| finished card |
 |
| back of card |
 |
| This back is made from a preprinted quilt label from Kaufman-I printed the lettering and the lines |
|
|
|
|
|
|
|
Last Step Put in a plastic sleeve and mail
You can have the post office hand cancel the postcard and then put it in a sleeve to keep it safe-tape back down securely.
 | | |
| ready for mailing |
|
|
|
|
|
|
|
|
|
 |
| nature inspired |
 |
| Valentine's Day |
 |
| Mother's Day |
 |
| St. Patrick's Day |
I hope you have enjoyed the tutorial. I only ask that you not copy my original designs. You can surely do better:)
